WinAC RTX 2010 2010 4.6 x86 [2010, ENG] torrent

Программы и Дизайн » Системы для бизнеса, офиса, научной и проектной работы » САПР (электроника, автоматика, ГАП)

WinAC RTX 2010

Год/Дата Выпуска: 2010
Версия: 2010 Build 4.6
Разработчик: SIEMENS
Сайт разработчика: https://www.automation.siemens.com/mcms/programmable-logic-controller/en/software...ges/Default.aspx

Разрядность: 32bit
Язык интерфейса: Английский
Таблэтка: Отсутствует
Системные требования: x86 OS
Pentium 4 2.4GHz
1Gb RAM

Описание: Description
SIMATIC WinAC RTX is the SIMATIC software controller for PC-based automation solutions and permits real-time capable, deterministic control functions to be carried out on the PC.

Engineering

SIMATIC STEP 7 is the one engineering software for all, the modular SIMATIC controllers
S7-300/S7-400 and the software controller WinAC.

Platforms
SIMATIC WinAC RTX runs on standard PCs with MS Windows XP and embedded operating systems and is optimally matched to SIMATIC industrial PCs. Use on embedded PC platforms, such as the SIMATIC IPC 427C or the SIMATIC HMI IPC 477C, results in especially affordable and extremely robust solutions. SIMATIC WinAC RTX uses the main memory of the PCs and offers program backup on the hard disk/flash drive. Non-cyclic data, such as production parameters or recipe data, can be stored permanently on the memory of the PC with the help of system functions. In addition, all data can be held retentively in conjunction with an uninterruptible power supply (UPS).

Connection of the I/O
SIMATIC WinAC RTX can control the distributed I/O not only via PROFIBUS, but also via PROFINET. The I/O is connected via PROFIBUS DP at up to 12 Mbit/s via the integral DP interface of the SIMATIC IPCs or via communication processors (CP 5611 A2/5613 A2).
You can operate up to four PROFIBUS lines with up to 500 slaves. In addition it is possible to connect the I/O via PROFINET. This requires either the integrated Ethernet interface of the SIMATIC IPC or a communication processor CP 1616 (PCI) or CP 1604 (PCI-104).
Furthermore WinAC RTX also supports the system function isochronous mode.
With isochronous mode, high-speed, time-dependent applications such as closed-loop controls can also be implemented with distributed I/O.
[spoiler="Скриншоты"]

[/spoiler]
[spoiler="Скриншоты окна About"]

[/spoiler]