Udemy - Embedded USB Programming on STM32 - Build Real USB Devices torrent

Embedded USB Programming on STM32: Build Real USB Devices
https://WebToolTip.com
Published 10/2026

Created by FastBit Embedded Brain Academy

MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch

Level: All Levels | Genre: eLearning | Language: English | Duration: 23 Lectures ( 4h 25m ) | Size: 1.9 GB
Learn USB firmware development on STM32 microcontrollers through practical embedded systems projects and applications.
What you'll learn

⚡ Build a working USB HID mouse on STM32 and watch your own cursor move on the host PC.

⚡ Build a USB mass storage device that your PC mounts as a removable drive with readable text files on it.

⚡ Read and hand-write every standard USB descriptor: device, configuration, interface, endpoint and string.

⚡ Walk through USB enumeration step by step, from attach and reset to address assignment and configuration.

⚡ Decode a USB control transfer

⚡ Pick the right transfer type for the job, and say why: control, interrupt, bulk or isochronous.

⚡ Capture live USB traffic on your own machine with Wireshark and USBPcap, and read what host and device exchange.

⚡ Dump and decode the real descriptors of a device you already own, using USB Device Tree Viewer or lsusb.

⚡ Configure the STM32 USB peripheral in STM32CubeMX: the clock tree, the pins and the USB device middleware.

⚡ Read and modify ST's generated USB code with confidence instead of treating it as a black box.

⚡ Diagnose the USB failures that cost real projects days: descriptor length mistakes, clock misconfiguration, sleep and wakeup hangs.

⚡ Explain USB signalling: DP and DM, NRZI encoding, bit stuffing, the sync field, J and K states, SE0 and reset.

⚡ Write HID report descriptors for mouse and keyboard reports, and handle the SCSI commands a mass storage device must answer.

⚡ Finish a capstone that turns your mouse firmware into a custom HID keyboard with macro keys.
Requirements

❗ You should be comfortable with C. No prior USB knowledge is needed, we start from zero.

❗ Basic embedded experience on any microcontroller. Prior STM32 experience helps but is not required.

❗ An STM32 MCU based develpement board if you want to try hands on

❗ STM32CubeIDE, which is free. The capture and inspection tools used in the course are free too, so there is no tool to buy.